【Description】
The MGS13 GPS Splitter is a one-input(IN), three-output(OUT1,OUT2,OUT3) GPS device. This product’s typically application is that the signal receiving from an active GPS antenna be transmitted to the 3 outputs,then arrived at the receivers which connect to the outputs. Like this, the MGS13 can be configured to pass DC on RF output (OUT1,OUT2,OUT3) ,power the active antenna which connect to the input port . MGS13 can take electricity from the RF outputs automatically. RF outputs (OUT1,OUT2,OUT3) all would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to those ports.
The most common application is the input from an active GPS/GNSS roof antenna or GPS simulator is equally split to three receivingg GPS units.
The MGS13 will support long-lasting, trouble free deployment in a small cell wireless and/or CORS center stations. The device makes it possible to use a single GPS/GNSS referencing antenna for synchronization systems, increasing capacity without increasing GPS/GNSS antennas or cabling requirements.
【Technical Parameters】
